| |
Fundamental TechnologiesCassini MIMI Pages |
Document: VTT-TT-XX-IFD-1
Issue/rev: 1/0
Date: 18/10/1994
Page iv
| Item | Page/Section | Input |
| Deceleration activation | 3/3.1.1 | VTT/MPAE |
| Inertial loads | 5/3.1.4 | MPAE |
| Discrepancy in mass property accuracy requirement versus mechanical disturbance requirement | 5/3.1.5, 3.2.1 | VTT/JPL |
| Number of life test cycles, 10 RPM --> 2000 | 5/3.1.6 | VTT/MPAE |
| Microphonics | 5/3.2.1 | JPL |
| TT temperatures | 6/3.2.3 | MPAE/JPL |
| LEMMS dummy mass and CoG position | 6/3.2.5 | MPAE |
| TT maximum power (3W) | 7/3.3.1 | VTT |
| Location of thermistor and RTD | 7/3.3.4 | VTT/MPAE |
| Thermistor type | 7/3.3.4 | MPAE/APL |
| Torques resulting from S/C accelerations | 12/3.3.7 | VTT/JPL |
| Heater values, locations, procurement | 12/3.3.8 | APL |
| Mass | 13/3.4.2 | VTT |
| LCR pretension | 13/3.4.7 | VTT |
| Location of MLI fixtures | 14/3.4.8 | VTT/MPAE |
| Functional tests | 19/5.1 | VTT |
| Pyro shock test | 21/5.1, 5.2 | VTT |
| Thermal balance test boundary conditions | 21/5.1 | VTT/JPL |
| ACT life test environment | 21/5.1 | VTT/SWRI |
| TT life test environment | 21/5.1 | VTT/MPAE |
| Run-in environment | 22/5.1,5.2 | VTT/MPAE |
| TT CDR | 24/7.1 | VTT/MPAE |
| List of hi-rel parts for APL procurement | 25/7.2 | VTT |
| LAM wiring | ||
| EM/PFV vib test specs | ||
| Changes due new issue of CAS-3-240? |
Next: Latch clamp ring
Return to LEMMS Turntable Design Status main page.
Return to Historical MIMI Memos and Notes main page.
Return to Cassini MIMI table of contents page.
Return to Fundamental Technologies Home Page.
Updated 6/20/08, T. Hunt-Ward
tizby@ftecs.com